Re: 67 Z small journal crank
 

engine,check out the overflow bottle https://www.yenko.net/ubbthreads/images/graemlins/no.gif
http://i96.photobucket.com/albums/l1...1/P9290006.jpg

Re: 67 Z small journal crank
 

This car is missing a few parts that I would like to locate,A correct date coded alt part#1100693 37 amps, pre 03B build date of car.deep groove power steering pulley cast iron part# 3873847.also both stock exhaust manifolds for a 67 Z/28.Thanks for any help.Ron

Re: 67 Z small journal crank
 

Looks good Ron. Congrats! I could hear the excitement in your voice the other night when you called me https://www.yenko.net/ubbthreads/imag...lins/beers.gif You need an 822 (last 3 digits of the casting number) crank for the car.

Re: 67 Z small journal crank
 

[ QUOTE ]
Looks good Ron. Congrats! I could hear the excitement in your voice the other night when you called me https://www.yenko.net/ubbthreads/imag...lins/beers.gif You need an 822 (last 3 digits of the casting number) crank for the car.

[/ QUOTE ]Thanks Mark,cant wait to get it detailed.do you have any parts?lmk thanks Ron

Re: 67 Z small journal crank
 

Sorry Ron, nothing extra.

Re: 67 Z small journal crank
 

The cranks I have seen come out of the 3917265 box have all been cast with "6764" on them, not "822". These had the tufftride coating on them.

-Jon

Re: 67 Z small journal crank
 

Just to be clear, the "6764" crank appears to be a later casting number and is found in over the counter parts and CE blocks from what I can tell. The 3 original 302's that I have opened up all had the "822" casting number including my current July built 302. I don't know if the "6764" ever made it into an original 302 delivered in a car, but I would use either if it were my car.

Re: 67 Z small journal crank
 

nice car.

Re: 67 Z small journal crank
 

[ QUOTE ]
Sorry Ron, nothing extra.

[/ QUOTE ]
Thanks Mark https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: 67 Z small journal crank
 

Use the steel 283 crank. Besides tufftride wears off in time on used cranks if they are cut. Doesn't really mean that much anyways. https://www.yenko.net/ubbthreads/imag...ins/3gears.gif https://www.yenko.net/ubbthreads/imag...ns/burnout.gif