The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   Tires for a '69 Z28 (https://www.yenko.net/forum/showthread.php?t=87429)

lzdick 07-03-2006 10:40 AM

Re: Tires for a '69 Z28
 
Yes, Charlie, your keen eye serves you well. I just picked this car up about a week ago and the 'flaps' are goners as we speak. I am looking for wheel well mouldings that will fit correctly as the originals have holes from installation of the flaps. Any help in finding a set?

Rich

92646 07-03-2006 09:26 PM

Re: Tires for a '69 Z28
 
I just picked up a set of 15x7 TTO American 5-spokes and I was thinking of running 225/60/15 in the front and 235/60/15 in the rear. I am concerned about the offset of the 5-spokes and I do not want any contact with the wheel well molding. Do you think the 225/60/15 tire might be to short or small in a stock height 69 camaro?
Mark Sheppard

DarrenX33 07-03-2006 09:36 PM

Re: Tires for a '69 Z28
 
Mark-

Contact user Lemans69 about this. He has been researching for a few months and should have some good info..

Jeff H 07-03-2006 09:52 PM

Re: Tires for a '69 Z28
 
Just as a side note, I ran some Vintage WheelWorks 16x8 torq thrust style wheels on my old 68 and ran 245/50/16's up fornt and 255/50/16's in the rear. The 255/50/16 is a nice fat tire that fits.

92646 07-03-2006 10:23 PM

Re: Tires for a '69 Z28
 
i had a 1969 Z10 that I lowered 2 inches all the around with the same wheels but with 245/45/16 in the fronts and the same 255/50/16 in the rear. Car looked great and had minimal rubbing only at full lock.
Mark Sheppard

Salvatore 07-03-2006 10:37 PM

Re: Tires for a '69 Z28
 
[ QUOTE ]
I just picked up a set of 15x7 TTO American 5-spokes and I was thinking of running 225/60/15 in the front and 235/60/15 in the rear. I am concerned about the offset of the 5-spokes and I do not want any contact with the wheel well molding. Do you think the 225/60/15 tire might be to short or small in a stock height 69 camaro?
Mark Sheppard

[/ QUOTE ] I am running BFG's 215/70R15's in the front and 235/70R15's in the back with the new TTO's. The front does rub (when turning) with them on so I took the bottom bolt out of the wheel housing and replaced it with a allen head tapered fit. It is flush. That was all it needed. The back is no problem.

DarrenX33 07-03-2006 10:44 PM

Re: Tires for a '69 Z28
 
You got those mounted finally? Post a pic of that set up my man! https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Dave Rifkin 07-04-2006 12:27 AM

Re: Tires for a '69 Z28
 
I had a 1968 SS/RS that had 15 x 8's with a 4.5" backspacing and I ran 275-60-15 BFG T/A's in the rear with no issues at all; in fact I think I could have gone a little wider.

nrjulin 07-04-2006 04:14 AM

Re: Tires for a '69 Z28
 
[ QUOTE ]
I had a 1968 SS/RS that had 15 x 8's with a 4.5" backspacing and I ran 275-60-15 BFG T/A's in the rear with no issues at all; in fact I think I could have gone a little wider.

[/ QUOTE ]

I have that setup on my 69 L78. No issues at all.

http://i33.photobucket.com/albums/d8...8/IMG_0781.jpg


All times are GMT. The time now is 01:32 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.