Re: 69 COPO brake problems
 

I would go with the rod issue, been there fought that!!

Re: 69 COPO brake problems
 

I had this happen on my 69 Yenko. Incorrect rod adjustment. Drive the car untill this happens, take some tools with you,losen the master cyl. from the booster,if this helps adjust the rod. You should have about an inch or two free travel on the brake pedal

Re: 69 COPO brake problems
 

OK all fixed..just came back from a test drive https://www.yenko.net/ubbthreads/imag...ns/naughty.gif. Master rod was too long!! you guys are the best!! https://www.yenko.net/ubbthreads/imag...iggthumpup.gif.had a nice 5 minute cruise around the neighborhood and they feel like they should..finished up with a nice 1st-2nd blast..5K or so..feels real good!! Thanks again.

ALbert

Re: 69 COPO brake problems
 

Terrific! I love it when a plan comes together.

Re: 69 COPO brake problems
 

Let that be a lesson to all those non-members: membership has its priveleges. If ALSS was a non-member he would have been charged the standard rate of $100 per question. Join today, operators are standing by, Mastercharge and Visa accepted, makes a great christmas gift...

Re: 69 COPO brake problems
 

https://www.yenko.net/ubbthreads/imag...mlins/haha.gif

Re: 69 COPO brake problems
 

Hey ALbert....those repop boosters will get ya every time!!! glad your all fixed up.Nicks LS-6 should be sportin some new green paint by the end of the week if all goes well.that car really needed a frame off. who ever heard of a "driver" LS-6 chevelle??? your copo vs his LS-6.what do say to a little friday nite grudge match???

bob

Re: 69 COPO brake problems
 

[ QUOTE ]
Hey ALbert....those repop boosters will get ya every time!!! glad your all fixed up.Nicks LS-6 should be sportin some new green paint by the end of the week if all goes well.that car really needed a frame off. who ever heard of a "driver" LS-6 chevelle??? your copo vs his LS-6.what do say to a little friday nite grudge match???

bob

[/ QUOTE ]

Bob the booster is actually a nice piece!..had the rod that attaches to the pedal too long and was not releasing the master!!..a 1/4 inch did the trick!..as for racing that crazy Bulgarian..no way!! he has more tricks up his sleeve than a magician https://www.yenko.net/ubbthreads/imag...mlins/grin.gif..and I like the idea of a "driver" LS-6..wish I had something I could drive and get dirty https://www.yenko.net/ubbthreads/imag...mlins/grin.gif Get that car done..been waiting to see it for over a year now..my spare 512 block is going in that car!!

ALbert