Re: interior paint question
 

I didn't think about the build date till you mentioned Ray's and the other 68. My build date is 07B which I think is the same week as ray's.

Tommy

Re: interior paint question
 

This is the break line on my 68 GTO the upper dash... where the VIN is is 0 deg gloss then the lower is semi gloss. http://www.crossroadspaper.com/dash ...line 1_web.jpg
Another shot... http://www.crossroadspaper.com/dash top color 1_web.jpg

Re: interior paint question
 

I got up to where I've got my 68 stored and checked it. It's an original Tripoli tourquise car, bench seat, 307 glide. O 3 A build. It has the rear area painted low gloss black.

Re: interior paint question
 

Tommy K's car.

Re: interior paint question
 

And here's Ray's car. I zoomed this from a larger picture so the quality isn't the best, but you can tell the piece in question is in fact <font color="blue">Blue. </font>

Re: interior paint question
 

I hand sanded with 600 grit and only find black. I used stripper in A couple of areas and it didn't reveal any blue at all. Thats odd because my package tray area cleary has the same blue paint on it that the dash and portions of the doors have on them . I'll sand more this weekend but I think my car is supposed to be black at the base of the rear window. The only other thing I need to find out now is where does blue paint stop at door frame and doors and where does the black exterior start???

Tommy https://www.yenko.net/ubbthreads/imag...lins/smile.gif

Re: interior paint question
 

Before I looked at mine, I was going to throw in the towel and say I might be wrong. Tommy, the black starts about 1-2 inches in a straight line, all the way across the package tray area, in the back, and goes up onto where the back glass sets.
Again, mine is a cheapo bench seat interior, where Ray's, and Tommy K's are deluxe.
Havn't had a chance to check out Jon's yet. Seems like there is no rule of thumb when it comes to 68's
Tommy, didn't you tell me once that one of the previous owners thought your car had day 1 aluminum heads installed at the dealership?

Re: interior paint question
 

My car is kinda weird Schonye, It has all the chrome stuff outside and is A SS car but is A stripper inside with the cloth blue bench and rubber floor. I got conflicting info from the 2 owners I was able to talk with about the engine. I do know it ran A 427 for many years in the 70's but don't have A clue about it's original engine. I talked with some people in the area where I bought it and some said they only knew the car with A 427 Aluminum head and then later as A 396 aluminum head. Everything was A dead end on the history so I finally just left it alone. Who knows........

Tommy https://www.yenko.net/ubbthreads/imag...ns/burnout.gif

Re: interior paint question
 

I've been doing some checking on this color vrs black issue. Looked at a 70 nova today at a car show. It was gold, with a gold dash, and the rear window support was interior gold also. Talked to Cronkleton today. His red 68 L78 has a black interior, with the window support black. My thought is this. If your car came with colored seats, the interior, including dash area, and rear window support were most likley interior body color. If your seats were black, the dash area, and rear window support area were black. Ray, and Tommy K's gibb cars have color seats therefore they have body color window supports. My 68, and Cronkletons have black seats, so they have black rear window supports. If your car had colored seats, and headliner, that back panel should be interior body color. Black seats, and headliner, black window support.
Greg, please also do some checking, but this is what I've found so far.

Re: interior paint question
 

I removed my rear window so I could sand that area better and to check the area around the window for rust. It appears that someone had sanded that support completely before because it was the only area with red primer. I had A few pits around the window so it was good I took the window out. I did find blue paint under black covering the entire package tray and down into the valley below the rear window support. the paint I removed on the support was very thick, looked as if they tried to spray it while the window was still installed. When I got the car that area was carpeted so not only did I have to remove all the paint but carpet glue as well https://www.yenko.net/ubbthreads/imag...emlins/eek.gif https://www.yenko.net/ubbthreads/imag...emlins/eek.gif.

Tommy https://www.yenko.net/ubbthreads/imag...ins/3gears.gif