Re: 1970 chevelle LS6 and L78 rear springs
 

<font color="blue">Make sure when your done with photoshop, the pic is saved as a 'jpeg' or 'gif'.
I've had that problem also. https://www.yenko.net/ubbthreads/imag...ins/tongue.gif </font>

Re: 1970 chevelle LS6 and L78 rear springs
 

Mike
I did that I saved them Jpeg
and still did not work
thanks
suprss70

Re: 1970 chevelle LS6 and L78 rear springs
 

In the 70 Chevy overhaul manual curb height is measured at the front and rear rocker panel.10 inches is the average measurement.Ride height is measured between the top of rear axle tube to bottom of frame rail,not to the snubber.They call for 5 inches at that point.

Re: 1970 chevelle LS6 and L78 rear springs
 

This should do it. When saving in Photoshop, it should ask you what "quality" you want to save it in and will show (in very small font near the bottom of the window) the file size.
For posting here it just needs to be under 100K if that helps in the future. I simply went to File, Save as, I renamed it and selected low quality (3) which brought it down to 66K.

Re: 1970 chevelle LS6 and L78 rear springs
 

Car looks good to me! I love that color! https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Re: 1970 chevelle LS6 and L78 rear springs
 

Peter:

Car looks fine. According to your dimensions, rear is right on and front is high. My experience with new restos is that the front is a little high until it settles. I have a 12k mile 70 SS (untouched) that looks like a lowrider compared to my fresh LS6!
Love that frost green!
Dave

Re: 1970 chevelle LS6 and L78 rear springs
 

Looks great! https://www.yenko.net/ubbthreads/imag...iggthumpup.gif Dave, I think that's actually code 45 "Green Mist."

Re: 1970 chevelle LS6 and L78 rear springs
 

Thanks for the compliments I will try to post the rest of the car It turned out stunning. I made sure that everry bolt
and nut was the origional as this L78 car has been owned by me for about 24 years and it was time to restore it.
thanks for yuor help
suprss70

Re: 1970 chevelle LS6 and L78 rear springs
 

2nd pic

Re: 1970 chevelle LS6 and L78 rear springs
 

3rd pic
Thanks Mark it worked! https://www.yenko.net/ubbthreads/imag...lins/laugh.gif

Oh yes the license plates were a present from all my children on My 40 th birth day.
suprss70