Re: 1969 Phase 3 GT Corvette
 

The Phase III GT I remember seeing at Motion Peformance was a 1969 Corvette. It did not have the stinger stripe down the side; just the black tail panel with the wrap around stripe on the rear section. I also don't recall it having the slotted tail lamps and, if it did, they weren't as large as the ones in the picture above. The hood striping was different too; I think it just had the center stripe and not the wrap around stripe and finally the car was definately pearl yellow and not Daytona yellow. Oh yeah, the car had a 427 in it and not a 454.
I was only 8 years old at the time but that car and the visit to Motion Performance left quite the impression. Heck for all I know my parents were talking to Joel in the "showroom" area where the car was located. We even walked back in an area where they had a Berry Mini-Tub and in a service bay we saw a brown with white stripe Camaro being turned into a Phase III Camaro.
If only I could travel back in time.

Re: 1969 Phase 3 GT Corvette
 

[ QUOTE ]
Going through my magazines, I came upon the November 1996 issue of Car Craft. Mr.Miles Cook did an article on Joel Rosen's '70 Phase III Corvette. It was pictured next to a B-17 WWII bomber. My scanner is dead, so I don't have a way to post the pics. By the way, who makes a good reproduction of those Lemans gas caps? See ya.--Bullitt

[/ QUOTE ]


http://cgi.ebay.com/ebaymotors/Lot-Flip-...598059119QQrdZ1

Re: 1969 Phase 3 GT Corvette
 

That it is much smaller than one that Motion used.

A Vette cap is 5 3/4" across and the pop-up caps that Joel used are that same size. The mount should also be round not shaped like that one.

It looks to be a lot smaller than one that was used on the corvettes Joel sold. They also did not have the lettering on the top of the cap like that one does.

I bet that is a boat cap of somekind.

Pantera

Re: 1969 Phase 3 GT Corvette
 

My first impression is that it is much smaller than one that Motion used.

I would ask the seller on that cap what it measures. A Vette cap is 5 3/4" across and the pop-up caps that Joel used are that same size. The mount should also be round not shaped like that one.

It looks to be a lot smaller than one that was used on the corvettes Joel sold. They also did not have the lettering on the top of the cap like that one does.

I bet that is a boat cap of somekind.

Pantera

Re: 1969 Phase 3 GT Corvette
 

Larry,

When are you going to come down here and take me for a ride in that car??? https://www.yenko.net/ubbthreads/imag...ins/3gears.gif

Re: 1969 Phase 3 GT Corvette
 

[ QUOTE ]
By the way, who makes a good reproduction of those Lemans gas caps? See ya.--Bullitt

[/ QUOTE ]

<font color="blue">When I was at the PRI show I got a CD
from a company the makes them in 6 different sizes.
I will post a link when I get back to work. </font>
https://www.yenko.net/attachments/178...8Medium%29.jpg

Re: 1969 Phase 3 GT Corvette
 

<font color="blue">The 3-1/2" Aston caps (center) look about correct.
Size is inner hole opening. </font>

http://www.thinkauto.com/images/enots.jpg

Re: 1969 Phase 3 GT Corvette
 

1996z15 could this vette your talking about have been a stock bodied vette like the green one that sold at barret jackson last year ? without fixed headlights , and stock tail lights just painted pearl yellow with black striping? or did it have the full body kit? just curious!

Re: 1969 Phase 3 GT Corvette
 

I am almost certain that it had the full body kit with the exposed headlights and the fastback window; etc.

Re: 1969 Phase 3 GT Corvette
 

I have an actual one here I'll try to post a picture of it
I'm willing to trade it for other Motion item,
I have two of these, will sell or trade only one.

I will not Ebay any Motion Items at this time just drop me a line with an offer.
I am only willing to let one of the two go ,
I drove a long way for these things...and loved every second of that drive https://www.yenko.net/ubbthreads/imag...lins/smile.gif

Hey Larry! How have ya been? Haven't talked with you in a while

I will try to post this picture ??
Be patient I'll figure it out