Re: Were there ever any Yenko or motion cars built that had A/C ?
 

The 69 road test's from SS&DI July and August are great articles, but have mistakes. They also mention that the cars have duel point distributors. This is not correct. As for A/C in a 69 Yenko, I have never seen that.
BKH

Re: Were there ever any Yenko or motion cars built that had A/C ?
 

Another issue, which I had to deal with on my tribute car, which will be an air car, since my car was originally SB with air. The 840 heads do not have the three bosses for the lower A/C bracket. It has the upper forward one, but not the upper rear one, or the lower one. I modified an original big block bracket, to pick up two manifold bolts. It works, and looks stock from the top of the engine, but if you look close, you can see the fabrication. I don't know if all Yenkos used 840's or if the last batch used the 291's. Did the 291's have the bosses?

Re: Were there ever any Yenko or motion cars built that had A/C ?
 

I believe it was a trick that Don pulled on the magazine to get more coverage! After the 7/69 article, why not bribe them with a 'comfort and speed' car? When they come to do the test, just give them whatever is available. Just a thought!!
M

Re: Were there ever any Yenko or motion cars built that had A/C ?
 

Unreal: Could you define a "tribute car"? I'm wondering how that might differ from the oft written and talked about "clones" and "fakes". I personally don't see anything wrong with someone mocking up a supercar for their own pleasure. We have to realize that this will go on, and in fact, it makes allot of sense, in my opinion, to drive a 20,000 car instead of a fresh 70,000+ car on a regular basis. I do think that those of us involved in legitimate cars need to find a way to identify these cars to avoid future misidentification by unscrupulous sellers to unsuspecting buyers. Anyone have any ideas?

Re: Were there ever any Yenko or motion cars built that had A/C ?
 

I suppose publising the VIN's is likely the most foolproof way to stop the flow of fakes. The ZL-1's are pretty well covered as the entire VIN's are out there, though there is at least one car that was a complete rebody. On the COPO Connection website, many of the other Supercar VIN's are shown. I'd like to see that information incorporated into some pages on this site as the COPO site is rarely updated. The COPO 9561's are more problematic because no one even knows the number built let alone the VIN's. The Motion VIN's, we've discussed those a number of times and everyone knows the issue there.

I don't see a problem with a "tribute car" ie: replica, clone. I would add, to do one right, will often cost close to the same $$'s as a real one for certain models. Case in point a really nice '70 Yenko Duece replica was available for $14,000, yet the owner spent over $30K to build it. The flip side is because these cars are rare and expensive they aren't often seen in public which sometimes adds to the mystique and the wow factor when they are on display at events like the Supercar Reunion.

Re: Were there ever any Yenko or motion cars built that had A/C ?
 

I would expect that more than one [maybe more than we want to know] of each of the supercars is a total body swap. Re the vins on the COPO connection site, I must be doing something wrong, as the partial numbers listed seem pretty worthless to identify a specific car. Am I missing something?

Re: Were there ever any Yenko or motion cars built that had A/C ?
 

The partial VIN's on the COPO site was to narrow down potential cars. It might seem misleading but if you had a '70 Nova that you thought might be a Yenko you could check your VIN against the sight to see if it was within the ball park. If so, then you could request further verification from the site. It would be hard to publish the Yenko VIN's at this time, because they are not all known.
M

Re: Were there ever any Yenko or motion cars built that had A/C ?
 

Marlin, do not speak ill of D.Y.. His ghost may come on Halloween and put some 1986 sugar in the gas tank of your Deuce! Give Don a little credit after all he was a car salesman and his job was to move product. My guess is that he intended to give them a "loaded" Yenko Chevelle with power steering, auto trans, bucket seats, and vinyl top. The AC option was probably an exaggeration by Don or by the magazine. A Yenko Chevelle equipped that way is fairly plush by SuperCar standards. There is enough room for four adults to sit comfortably and listen to the rear tires squeal as the TH400 bangs through the gears at 6000+ RPM. On a side note, the one owner 4sp Garnet Red Yenko Chevelle that attended the SuperCar Reunions 2&3 has AC, PS, bucket seats, power windows, factory gages, and remote trunk release. The original owner, who transplanted them from parts cars during the 70Ãs, added the options.

Re: Were there ever any Yenko or motion cars built that had A/C ?
 

Sixteismuscle,
I inadvertantly started a debate on this subject several months ago; I don't want to resurect it. But to me a clone or "tribute" car (nicer sounding moniker) is made to look like an original, but with the absence of the intent to deceive. "Fakes" in my opinion, include ill intent. I have no intention to represent my car as anything but a nice clone. The problem remains, however, that if I were to sell it, the buyer might not be as honest.
Anyone with anything more than a passing understanding of the COPOs could see in a second, that my car is not real. A/C, 3.73 rear, unaltered engine code (mine is LE,) unaltered VIN on the engine, pass side grab bar...etc, etc. I support the concept of registering clones, and making the information public, so that misrepresentation could be reduced. But with all the clones out there, that's a real chore. And only the honest folk would register. You're right, this debate will continue, ad infinitum.
Gary

Re: Were there ever any Yenko or motion cars built that had A/C ?
 

Sixtiesmuscle, you could be correct in assuming at least one S/C could be a rebody. In '86 I saw a Yenko for sale on the east coast of Florida the only part left of it was the cowl the rest had rotted into the sand. I didn't buy it one because the $16,000.00 asking price was high for just a serial number and two what would I really have when I was done, in my mind it would be totally wrong.