The Supercar Registry - 69 small block mount info

The Supercar Registry (https://www.yenko.net/forum/index.php)

- Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)

- - 69 small block mount info (https://www.yenko.net/forum/showthread.php?t=173293)

Quote:

Originally Posted by Edgemontvillage (Post 1602458)

"Cool and I forgot to look on CRG -older age is great isn't it? -I found the thread there, was hoping for some measurements of through bolt spacer and washer if its handy? I have also reached out to Lloyd Edgemont as he was looking I'm pretty sure he has located it by now

"

Mike (rszmjt) is your best source for the measurements on those second design mounts as I have the first design (and they're now installed on the car).

Lloyd.[/QUOTE]

Thanks Lloyd! Im going to ask your unanswered question here from the CRG thread

1. Length of the through bolt
2. Diameter and thickness of the flat washer (it appears to be extra thick)
3. Inside and outside diameters of the bright sleeve that passes through the motor mount stop bracket (best view is the first photo)

my car is a Sept 69 built car

OK, I found them , had to dig through quite a few big totes as they were in storage, sorry for the delay.

Thick washer - 1.380 OD
- .187 thick

Spacer - .875 OD
- .565 thick

Through bolt is - 4.450 bolt length underhead to tip
TR head marking with 6 slashes.

Hope that helps.

Cheers. Mike

Quote:

Originally Posted by rszmjt (Post 1602534)

Great thanks Mike!! I borrowed link to pic of the mount assembled