The Supercar Registry - paint removed off plastic

Page 2 of 2

Show 40 post(s) from this thread on one page

The Supercar Registry (https://www.yenko.net/forum/index.php)

- Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)

- - paint removed off plastic (https://www.yenko.net/forum/showthread.php?t=159322)

Burd	02-04-2020 08:25 PM

Citrus Strip is safe on most plastics.

ronzz572

02-04-2020 08:52 PM

I soaked a lot of parts in evaporust. It has always soften up the paint or removed it. Never tried it on a fan shroud. But I bet it would work. Even if it softens it and then used a high pressure air blow gun to remove what's left.

L78steve

02-05-2020 03:50 PM

Quote:

Originally Posted by clnovaparts (Post 1481797)

Use Super Clean. The purple gallon container. Submerge the part for best results. Plastic model builder hobbyist use it. Check out YouTube videos. Won't hurt plastic. Don't get it on your skin. Great for stripping vacumn plating (chrome) on arm rest bases, AC balls etc. Read the directions on what not to use it on.

This is the best and safest. Castrol Super Clean.

ss427copo

02-06-2020 04:09 AM

I did mine and it came out perfect.
ZIP STRIP........It lifts paint right off and 0000 fine steel wool. Wash it good. DONE.
Of course, don’t try it while it’s attached. 😎

Mr.Nickey Nova

02-06-2020 07:15 PM

I tried paint stripper, which turned out just fine. Used a rag and plastic scraper then washed off with soap an water. Didn't harm the plastic at all...

Flying Undertaker

02-09-2020 11:57 AM

Paint removal off plastic

You may want to try regular lighter fluid. Do not leave on for extended period of time, just wipe on & wipe off. Use plastic cleaner soap like Super Clean or Simple Green diluted afterward for cleanup. Don.

All times are GMT. The time now is 02:23 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page

O Garage vBulletin Plugins by Drive Thru Online, Inc.