Re: Trying to verify original radiator mounting bolts
 

This design started sometime in 70 not 69. your bolts should have a pinched point Recessed/flanged head. GM pt # 396014. And more specifically the M in a hex is late 70's early 80's from what I have seen. Original headmarkings for 69's would be RBW, E Anchor, $, 23 C and a few more. Hope this helps, Rich.

Re: Trying to verify original radiator mounting bolts
 

I took a few pictures of the bolts holding my radiator on my 69 SB Camaro. It has 13k original miles on it (Ohio car). I don't think the radiator has ever been out of the car. I don't know if BB and SB had same mounting pattern, Mikey will know.

Here are the bolt from the driver's side:

http://i262.photobucket.com/albums/i...ps7sasfjyh.jpg

Passenger side: Bolts have points:

http://i262.photobucket.com/albums/i...psd9satav5.jpg


Overall picture:

http://i262.photobucket.com/albums/i...psfbrzk7o9.jpg

Re: Trying to verify original radiator mounting bolts
 

PS. I can get bolt head markings later if you need them.

Phil Woj

Re: Trying to verify original radiator mounting bolts
 

Ok gents thanks for all the info. Good stuff! Phil if you like you can post some bolt head markings later.

Sal [img]<<GRAEMLIN_URL>>/youguysrock.gif[/img]

Re: Trying to verify original radiator mounting bolts
 

Bolt head markings:

Driver's side with well nuts:

http://i262.photobucket.com/albums/i...psjrdiz8tq.jpg

Passenger side:

http://i262.photobucket.com/albums/i...psdg1rupnt.jpg

http://i262.photobucket.com/albums/i...psf9meoeps.jpg

Hope this helps.

Phil Woj.

Re: Trying to verify original radiator mounting bolts
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: m22mike</div><div class="ubbcode-body">Kurt, over the years when refering to the 69 AIM on hardware issues the revision date of 10/xx/68 seems to be in the manual allot, any insight on that ?

Mike </div></div>
I'd guess that there were a bunch of changes after the 69 launch that took about a month to implement. [img]<<GRAEMLIN_URL>>/wink.gif[/img]