Re: LS6 Low Rise Intake
 

Thanks Tony, I'll keep that in mind.

Re: LS6 Low Rise Intake
 

There is no need to drill out the rivets(sp?). A thin flat head or putty knife and a small hammer will do the job. Work the blade under the rivet and twist the handle. They will back right out. You can rotate them and reinstall with locktite or JB Weld if you are anal retentive. New rivits may not be a bad idea but I'm not sure it is makes a difference.

Jason

Re: LS6 Low Rise Intake
 

I was thinking that intake was also used for 70 L78 applications.

Re: LS6 Low Rise Intake
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Schonyenko2</div><div class="ubbcode-body">I was thinking that intake was also used for 70 L78 applications. </div></div>

Correct Ken, that intake was used for both L78 and LS6.

Kurt