Re: Body mount bolts and washers
 

These are out of a southern 68 nova. Are you talking about the front thick washer or spacer?

http://i35.photobucket.com/albums/d1...ps30dbee79.png

http://i35.photobucket.com/albums/d1...pse6f3c5e2.png

Re: Body mount bolts and washers
 

My originals are right at .125" or 1/8" thick.
The replacements I got with the poly bushings are barely thinner at .118".

I also have some from a 70 Nova, and they are just barely thicker than my originals from the 69 Camaro. They too are pitted.

I can live with the difference, but the replacments appear to be simple hardware grade, and they distort too easily.

Would like a good grade 8 washer. 5/8 hole, about 2 and 7/16 outside diameter and close to 3/16 inch thick.

Re: Body mount bolts and washers
 

Not sure if you have a machine shop close by. They can always take a solid piece of steel turn it down on a lathe, drill the 5/8 hole, and cut them to the correct thickness for you. Just an idea.

Re: Body mount bolts and washers
 

jasonL78,
What are the head markings on your subframe bolts?

Re: Body mount bolts and washers
 

I will have to look for you.