Re: BB CAMARO SPRINGS
 

According to John R Hoopers book "69 Camaro Reference guide" Chevrolet had 22 different front springs for the Camaro. The book has three pages devoted to springs (pages 344-346) They called it computer selected springs, it was selected from a table of different weights on the front.

The table shows 7 different springs for bigblock coupés and 6 for 'verts. Z/28s has 7 different springs one of them can be found on bigblocks (YH)

Today Moog has only one spring (or maybe two) for the Camaro so the chance that one of them would fit correctly is pretty slim.


Jan

Re: BB CAMARO SPRINGS
 

Let's see this car! Sounds awesome.


Jason

Re: BB CAMARO SPRINGS
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Glenn L78</div><div class="ubbcode-body">Your probably right, there is nothing wrong with the springs I just thought I would replace them during the resto </div></div>WHY! Don't restore/replace anything that don't need to be. It will just be another kit car IMO. 20,000 mile car sounds real nice to me unless it is wrecked or something.

Re: BB CAMARO SPRINGS
 

NO never wrecked or rusted,just going to do frame off resto I thought when
I change all bushings I would do springs also. Only original parts missing from car are carb and dist
I would post a pic if I can figure out how to.

Re: BB CAMARO SPRINGS
 

Email me the pics, I'll post them.

Dan
[email protected]

Re: BB CAMARO SPRINGS
 

I agree with Sammy,reuse the original springs for a low mile car, and you won't have to worry about the correct height.

Re: BB CAMARO SPRINGS
 

If you get the original print for the front spring, it should have those dimensions. Good luck getting that....

Here's a bunch of spring data, including load and rate info for 68's. Combine it with that aftermarket chart and you might get close.
http://www.camaros.org/suspen.shtml#spring

Re: BB CAMARO SPRINGS
 

Glen, when you are done replacing those parts for your resto shoot me a PM or email. Thanks, Sam