Re: 71 engine stamp decode needed
 

[ QUOTE ]
The Nasty site listing as shown indicates both CPA and CPD were MT codes for '71..

Considering the casting date it's probably a '71 but get the Vin sequence if it's there and count 8 digts back from the end for the model year also the plant digit and last six may help indicate which car line it was originally in..

https://www.yenko.net/ubbthreads/imag...lins/beers.gif
~ Pete

[/ QUOTE ]

VIN # : 11 L 126542

1 : Chevrolet
1 : 1971
L : Los Angeles
ID # : 126542


The crank is an 815NF

https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: 71 engine stamp decode needed
 

OK, so I am NOT up to speed with 71 part #'s....

What would be the correct Heads, Intake, Distributor #'s etc etc that would make this a correct engine again?

Re: 71 engine stamp decode needed
 

[ QUOTE ]
The Nasty site listing as shown indicates both CPA and CPD were MT codes for '71..

https://www.yenko.net/ubbthreads/imag...lins/beers.gif
~ Pete

[/ QUOTE ]

Im curious, could both be used as MT...

Smog & Non Somg installations?
https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: 71 engine stamp decode needed
 

My references show CPD as a '71 454/365hp with TH400.

https://www.yenko.net/ubbthreads/imag...lins/beers.gif