|
Re: 67 Z28 project
Charlie a '68 Yenko Camaro project is currently on ebay. You could have a home for both motors.
|
Re: 67 Z28 project
Yes I was told about that car by another member last weekend. I was told it was for sale for 125K. Spoke to the owner last night and was quoted 210K. It is missing the vin tag in the dash because it was stolen when it was about a year old. It has a Tenn state assigned vin with the same vin on a tag next to the Yenko tag. Also has a 160 speedo not the Yenko 9737 140 unit. Nice project but.....
|
Re: 67 Z28 project
1 Attachment(s)
This cowl plenum hole was cut out very nicely. https://www.yenko.net/attachments/361732-tn_001.JPG
|
Re: 67 Z28 project
1 Attachment(s)
|
Re: 67 Z28 project
1 Attachment(s)
cowl panel held in with cad plated screw. https://www.yenko.net/attachments/361734-tn_004.JPG
|
Re: 67 Z28 project
1 Attachment(s)
exhaust details that look orig to me but maybe a 67Z expert can confirm. https://www.yenko.net/attachments/361858-tn_001.JPG
|
Re: 67 Z28 project
1 Attachment(s)
Looks like sealant was used in the upper pipe joint. https://www.yenko.net/attachments/361859-tn_002.JPG
|
Re: 67 Z28 project
1 Attachment(s)
passenger side tailpipe is welded. https://www.yenko.net/attachments/361860-tn_003.JPG
|
Re: 67 Z28 project
1 Attachment(s)
|
Re: 67 Z28 project
1 Attachment(s)
|
| All times are GMT. The time now is 09:05 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.