Re: Next Years Power Tour Car Part 2
 

Here's the wheels I ordered.........Grey centers and brushed rims..........

http://i13.photobucket.com/albums/a2...l-0190_sml.jpg

Re: Next Years Power Tour Car Part 2
 

Ken, you need your own TV show! [img]<<GRAEMLIN_URL>>/smile.gif[/img]

Re: Next Years Power Tour Car Part 2
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DBelk</div><div class="ubbcode-body">Ken, you need your own TV show! [img]<<GRAEMLIN_URL>>/smile.gif[/img] </div></div>

Agreed!

Re: Next Years Power Tour Car Part 2
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kwhizz</div><div class="ubbcode-body">Here's the wheels I ordered.........Grey centers and brushed rims..........

http://i13.photobucket.com/albums/a2...l-0190_sml.jpg</div></div> great choice of rims ....just bench bled a master today came with 2 plugs to screw in where lines go kept pumping till rock hard then installed as far as rear brakes center pin in master long enough ? never mind no power brakes... as far as lines go maybe front is rear and rear is front

Re: Next Years Power Tour Car Part 2
 

I want a Pre-Power Tour BLAST in this Chevelle.....just as long as the brakes are working [img]<<GRAEMLIN_URL>>/naughty.gif[/img]

Dan

Re: Next Years Power Tour Car Part 2
 

Took the master off again last night and bench bled it again.......angled it slightly to raise the ports......no air......the front port has great flow into the reservoir while energizing.......create a wave from the bleeder line......the rear.......even though there is fluid movement doesn't have enough flow to even see any movement in the bowl.........Gotta be that the master is bad.........fluid flow but no force behind it.......I talked to the Wilwood guys and they want me to send it back to the person I bought the kit from so he can send it back to them for them to look at it....then they will send it back to him so he can send it to me...........(Just like the Government).......So......I took the easy way out and just ordered a new one from Jeg's......

Re: Next Years Power Tour Car Part 2
 

That's going to look good!

Re: Next Years Power Tour Car Part 2
 

So......I took the easy way out and just ordered a new one from Jeg's......


That's what they were hoping you would do.... [img]<<GRAEMLIN_URL>>/smirk.gif[/img]

And nice work too Ken.. [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

Re: Next Years Power Tour Car Part 2
 

There is not alot to a master cylinder so why don't you pull the snap ring and take it apart. You have a new one coming anyway.

Re: Next Years Power Tour Car Part 2
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Charley Lillard</div><div class="ubbcode-body">There is not alot to a master cylinder so why don't you pull the snap ring and take it apart. You have a new one coming anyway. </div></div>




I was just thinking the same thing!!..........